Standard Connector Principle

A standard connector is a detachable element (other than an adapter) that is normally mounted on a cable or device for electrical connection to the transmission line system. Domestic also known as connectors, Standard Connectors plugs and sockets. Generally refers to the electrical standard connector.

A standard connector is a detachable element (other than an adapter) that is normally mounted on a cable or device for electrical connection to the transmission line system. Domestic also known as connectors, plugs and sockets. Generally refers to the electrical standard connector. That is, Standard Connectors devices that connect two active devices, transmit current or signal. The standard connector is a motor system that provides a detachable interface for connecting two secondary electronic systems and does not produce an unacceptable effect on the operation of the system. The keywords in the definition are "motor system", "separable" and "unacceptable". Standard Connectors The standard connector is a motor system because it is electrically connected by mechanical means. As will be discussed, the mechanical spring bias will produce a force between the two parts of the fit, which makes the interface with the metal surface contact.

The reason for applying the standard connector in the primary place is that the mating interface is separable. There is a lot of reason for the need for separability. Standard Connectors It can make part or sub-system independently and the final assembly can be carried out in a major place. Detachability also allows maintenance or upgrades of parts or subsystems without modifying the overall system. Another reason why separability is applied is portability and support for extension of peripherals. On the other hand, the separability in the definition introduces an interface between additional subsystems that can not introduce any "unacceptable effects", Standard Connectors especially in terms of the characteristics of the system, which are not affected by telecommunications, Unacceptable distortion and signal degradation between systems, or loss of power through a standard connector, loss of power in millivolt loss, will become the primary design criteria for functionality, so the power demand for the motherboard will also increase The

The limits of separability requirements and "unacceptable" are determined by the application of standard connectors. Separable 4 includes the number of mating cycles, which means that the standard connector must be provided without affecting its performance, Standard Connectors as well as the force necessary to fit the other standard connector. Typical mating cycle requirements range from dozens of cycles of internal standard connectors to thousands of cycles of peripheral devices, such as PCMCIA type standard connectors. The demand for forces is even more important due to the increase in the number of circuits or functions and the interconnection of standard connectors. Standard Connectors In order to provide more functionality, the position of the terminals on the standard connector must also be increased, resulting in a higher standard connector fit. Depending on the use and function of the standard connector, the number of terminals varies from tens to thousands.

Standard connector principle

The so-called standard connector, is the liquid level below the two or several containers connected to each other. The standard connector contains the same liquid, but the pressure on the liquid level, the liquid surface pressure difference is equal to the two containers connected to the liquid level difference caused by the pressure difference. The standard connector has the same pressure on the liquid surface, Standard Connectors but there are different liquids on both sides. The height of the two surfaces is inversely proportional to the density of the liquid.

The standard connector principle has a wide range of applications in engineering. Such as various liquid level meter (water level gauge, oil level gauge, etc.), mercury vacuum gauge, liquid column pressure table, differential pressure gauge, etc., are the application of standard connector made of the principle.